Markforged

Designed to print parts with the strength of metal, the Mark Two Industrial Strength 3D Printer™ is the world’s first 3D printer capable of printing continuous carbon fiber, Kevlar®, and fiberglass. Using a patent pending Continuous Filament Fabrication (CFF™) print head alongside a Fused Filament Fabrication (FFF) print head, the Mark Two can create functional parts by combining a specially tuned nylon with continuous fiber filaments.

Mark Two Industrial Strength 3D Printer™ can generate 3D printed parts:
  • With a higher strength-to-weight than 60 61-T6 Aluminum
  • Up to 27x stiffer than ABS
  • Up to 24x stronger than ABS
 

Material Capabillties

Nylon
Fiberglass
Carbon Fiber
Kevlar
HSHT Fiberglass

Material Included

Nylon 1000cm3 2000cm3 2000cm3
Fiberglass 50cm3 200cm3 100cm3
Carbon Fiber 100cm3 100cm3
Kevlar 100cm3 100cm3
HSHT Fiberglass 100cm3
Extra Print Bed
Extra Nozzles 1 set 3 sets 3 sets

Software Storage

Coud
Local

Software Features

Sign Sign-On
Two-Factor Authentication
Organization Admin Portal
Early Access to New Features

THE MARK TWO INDUSTRIAL STRENGTH 3D PRINTER

The Mark Two Industrial Strength 3D Printing Now With:

40% faster fiber printing process Reinforce features 15 times smaller than beforeA host of incremental improvements in software, hardware, and materials to enhance the overall experience

Testing
Testing

High-Strength Printing

By reinforcing your parts with composite fiber while 3D printing them, The Mark Two achieves unparalleled strength, stiffness and durability in its printed parts.




Range of Materials

In addition to printing Nylon, the Mark Two prints materials that no other 3D printer can, like Carbon Fiber, Fiberglass and Kevlar.

Easy-To-Use

We built our own 3D printing software that comes with The Mark Two. Printing a part to be flexible or strong is easy and intuitive.


Carbon Fiber

Carbon fiber has the highest strength to weight as well as the highest thermal conductivity. Perfect for applications requiring the greatest possible stiffness and strength.

HSHT Fiberglass

High Strength, High Temperature (HSHT) Fiberglass is a material uniquely designed for users who need strong parts in higher temperature environments (over 105°C, with a heat deflection point of 140°C).

Fiberglass

Fiberglass is the most cost-effective material. It's a strong as Carbon Fiber, but 40% as stiff, and 2X the weight. Suited to everyday applications where you need strong parts.

Kevlar

Kevlar has the best abrasion resistance and is our most flexible material. For when you need parts that are durable and resistant to impact.

Powerful Software

Every Mark Two comes with Eiger, our browser based 3D printing software. Eiger runs on any computer and is designed to be easy to use. So you can get printing quickly.

Automatically Strong

Our software automatically reinforces your parts with fiber to maximize strength and stiffness.

Precision Design

The Mark Two print bed clicks into place with 10 micron accuracy – allowing you to pause a print, remove the bed, add components, click the bed back in and then continue the print in the exact same position.

  • Specifications -

    Higher strength-to-weight than 6061 Aluminum

    The Mark Two prints outer contours and curves in engineering nylon and fills each part with close-packed reinforcement in continuous carbon fiber, Kevlar or fiberglass. The printer actively switches between two nozzles during a print, creating fiber-reinforced plastic parts with a strength-to-weight ratio better than aluminum.


    Now you can 3D print parts up to
    5x 24X stronger than ABS

    The MarkForged Mark One continues to break new ground as the first 3D printer capable of embedding continuous strand carbon fiber, Kevlar®, and fiberglass into high quality Nylon resulting in incredibly strong parts. The choice of reinforcement lets you select from best strength-to-weight, the best strength with abrasion resistance and the best strength-to-cost with the speed of iteration and learning delivered by 3D printing throughout your product-development cycle.

    For the first time, professionals and designers can accelerate their design cycles and make exceptionally durable parts that meet production-grade thermoplastic and metal standards. After extensive testing we’ve fully vetted our materials and included 3rd party verification data to make sure parts created on the Mark One Composite 3D Printer™ are accurate, repeatable and stable over time.

    • Build Size: 320mm x 132mm x 154mm

    • Layer Resolution: 0.1mm

    • Materials:Carbon Fiber, Fiberglass, Kevlar®, Nylon

    • Machine Size: 575mm x 322mm x 360mm

    • Power Supply: 100–240 V 150 W

    • Software Requirements: SoftwareBrowser Based Supported OSWindows 7+, Mac OS 10.7 Lion+, Linux

    • Supported File Types.STL

Our Customers

OUR TRUSTED BRANDS At Aussie 3D you can Shop with Confidence knowing we sell quality products from leading brands